Maintenance Technician - $33.67hr

• Starting Rate: $32.97/hour + .70 shift diff = total pay of $33.67
• $0.70/hour night shift differential
• Night Shift: 11:00 PM – 7:00 AM
• Monday–Friday
• Voluntary weekend overtime available – Sunday is paid at double time
• Daily overtime opportunities may also be available – overtime after 8 hours in a day
• 4% pay increase scheduled for September 1, 2027 (yearly raise)

• Perform preventive, predictive, and corrective maintenance on manufacturing equipment
• Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems
• Maintain automated, semi-automated, and manual production machinery
• Support maintenance of tool and die equipment
• Diagnose equipment problems and determine the appropriate repairs
• Replace and install mechanical and electrical components
• Read and interpret electrical, mechanical, pneumatic, and hydraulic schematics
• Respond to equipment breakdowns and help minimize production downtime
• Perform equipment inspections and preventive maintenance
• Assist with equipment installation, modifications, and continuous improvement projects
• Support plant and facility maintenance, including HVAC, basic electrical, plumbing, carpentry, structural repairs, and general building maintenance
• Maintain a safe, clean, and organized work area
• Follow all safety, quality, and environmental procedures

• Previous industrial/manufacturing maintenance experience
• Strong mechanical and electrical troubleshooting ability
• Working knowledge of pneumatic and hydraulic systems
• Ability to read and understand technical drawings and schematics
• Strong problem-solving and diagnostic skills
• Ability to work independently and respond to production needs
• Good mechanical and technical aptitude
• Ability to work nights and support overtime as needed
• Successful candidates must pass a maintenance qualification test

• $33.67 hr starting rate including the shift differential
• 4% scheduled pay increase on September 1, 2027
• Union position
• Consistent Monday–Friday night shift
• 11 PM–7 AM schedule
• Voluntary weekend overtime
• Daily overtime opportunities
• Variety of mechanical, electrical, hydraulic, pneumatic, and facility maintenance work
• Opportunity to work with both automated and traditional manufacturing equipment
• Stable manufacturing environment
• Hands-on role where your technical skills directly impact production

• Receive customer purchase orders and enter orders into the ERP/MRP system
• Review vendor packing lists, match them to purchase orders, and process receipts
• Issue parts to production and generate manufacturing work orders
• Prepare shipping documents and coordinate carriers for completed orders
• Prepare and issue customer invoices after shipments
• Process purchase orders and shipments through ERP/MRP and other business systems
• Assist with accounts payable, accounts receivable, and basic bookkeeping activities
• Track vendor and customer payments and maintain accurate records
• Work with Finance and HR to complete day-to-day business activities
• Answer and direct incoming phone calls professionally
• Manage incoming and outgoing mail and general email inquiries
• Greet visitors and direct them to the appropriate personnel
• Maintain customer, vendor, and general business files
• Review employee timecards and enter information for payroll processing
• Order office supplies and assist with utility and business service accounts
• Coordinate meetings, appointments, travel plans, agendas, and office resources
• Provide general administrative support to management and the organization

• 2–5 years of administrative experience, preferably in a manufacturing or professional office environment
• Strong communication skills, both written and verbal
• Professional and friendly customer service skills
• Experience working directly with customers and vendors
• Strong organizational and time-management skills
• Ability to manage multiple priorities and work with a sense of urgency
• Strong attention to detail and accuracy
• Comfortable handling confidential and sensitive information
• Experience with Microsoft Office, including Word, Excel, and Outlook
• Basic understanding of accounting and bookkeeping practices
• Experience with accounts payable, accounts receivable, or basic financial reporting is a plus
• Previous experience with an ERP/MRP system is preferred, but the ability to learn new systems is important
• Positive, respectful attitude and the ability to work well with others
• Ability to prioritize work independently and adapt to changing needs

• Competitive pay based on experience
• Daylight shift
• Stable professional manufacturing environment
• Variety in your day — customer service, production support, purchasing, shipping, invoicing, and general administration
• Opportunity to work closely with multiple departments and management
• Position where your organization and communication skills have a direct impact on the operation

Position: CNC Programmer 
Pay Rate: $35.00hr+ based on prior experience 
Shift: Steady dayshift M-F
Summer Months (June-August) 4x10 schedule (M-Th)
Rest of year is a standard 5x8 schedule (M-F)
Location: Wheeling, WV

We are seeking an experienced CNC Programmer to join a well-established, family-owned industrial manufacturing company with a strong reputation for precision machining, engineering support, equipment rebuilds, and custom component manufacturing. This is a hands-on programming role supporting a machine shop environment that produces complex parts and assemblies for heavy industrial customers.

The ideal candidate will be detail-oriented, technically strong, and comfortable working in a fast-paced manufacturing environment where each job may bring different requirements. This person should be confident programming from prints, 3D models, and customer drawings while working closely with machinists, engineers, and shop leadership to ensure programs are accurate, efficient, and production-ready. The role requires someone who can troubleshoot during setup, communicate effectively on the shop floor, and help improve machining processes across the operation.

Key Responsibilities:

• Develop CNC programs for new and rework parts, including 3-axis through 5-axis machining applications
• Use CAM software to create accurate, efficient programs based on engineering prints, 3D models, and customer drawings
• Optimize tool paths, feeds, speeds, and tooling selection to improve cycle time, part quality, and surface finish
• Collaborate with machinists during first-piece setup, program proofing, troubleshooting, and process adjustments
• Review drawings and specifications to ensure programs meet dimensional, tolerance, and quality requirements
• Support programming for custom, low-volume, repair, rebuild, and production machining work
• Maintain CNC program libraries, tooling documentation, post-processors, and related setup information
• Assist with continuous improvement of CNC programming standards, machining processes, and shop efficiency
• Communicate effectively with machining, engineering, quality, and production teams to keep jobs moving accurately and on schedule

Qualifications:

• 3+ years of CNC programming experience in a job-shop, custom machining, repair/rebuild, or production manufacturing environment
• Proficiency with Mastercam, Gibbs, or comparable CAM software
• Strong ability to read and interpret blueprints, technical drawings, 3D models, and customer specifications
• Working knowledge of GD&T and tight-tolerance machining requirements
• Experience programming CNC mills, lathes, boring mills, or multi-axis machining centers
• 5-axis programming experience preferred
• Strong understanding of tooling, feeds, speeds, workholding, and machining best practices
• Ability to work independently while managing multiple jobs in progress
• Strong problem-solving skills and willingness to work directly with machinists on the shop floor

Preferred Background:

• Experience in heavy industrial, steel, mill equipment, pump, gearbox, foundry, repair/rebuild, or custom component manufacturing
• Background supporting large-part machining, complex assemblies, or reverse-engineered components
• Experience improving existing programs for better cycle time, quality, and repeatability

Position: Brake Press Operator 
Shift: Sunday-Wednesday OR Wednesday-Saturday
Shift Time: 5:00am - 3:30pm for both options 
Pay Rate: $20
Location: Glenshaw, PA

Join a dynamic manufacturing team dedicated to creating innovative architectural products that enhance public spaces worldwide. As a Brake Press Operator, you will play a vital role in shaping high-quality components used in walls, elevator interiors, site furnishings, lighting, and more. This is an excellent opportunity to apply your skills in a fast-paced, safety-conscious environment while advancing your career with performance-based incentives.

Required Skills

• Proven experience reading technical drawings and selecting appropriate tooling
• Ability to produce parts within tight tolerances for assembly
• Experience operating brake presses, CNC machines, or other heavy machinery
• Strong safety awareness and adherence to safety protocols
• Ability to use both hands to control equipment and handle materials
• Basic reading, writing, and math skills
• Competency in basic computer navigation and data entry
• Ability to stand for at least 8 hours daily and lift up to 50 pounds
• Flexibility to work overtime as needed

Nice to Have Skills

• Programming experience with CNC or hydraulic brake presses
• Experience performing spot inspections and quality checks
• Familiarity with adjusting equipment to optimize production flow

Preferred Education and Experience

• High school diploma or equivalent
• Prior experience in manufacturing or metal forming role

• Ability to work one of two shifts: Sunday - Wednesday or Wednesday - Saturday, from 5am to 3:30pm
• Commitment to maintaining a high standard of safety and quality
• Willingness to adapt to production needs and participate in ongoing training

Position: CADD Technician / CADD Programmer
Pay Rate: $28.85hr (Pay based on prior experience) 
Shift: Monday - Friday (9:00am - 5:00pm)
Location: Pittsburgh, PA

Join a dynamic team as a CADD Technician / CADD Programmer and play a critical role in transforming innovative designs into precise, high-quality fabricated parts. Located in Pittsburgh, PA, this position offers the chance to work with state-of-the-art equipment within a forward-thinking manufacturing environment. As a key contributor, you'll leverage your technical expertise to ensure seamless production processes and support long-term growth within the organization.

Required Skills:

• 1-3 years of drafting or programming experience in AUTOCAD (Your coursework from a technical school counts!)
• Proficiency with AUTOCAD 2D, including interpreting manufacturer drawings
• Hands-on experience with SAP and handling print files such as .DXF and .DWG
• Strong aptitude for building spreadsheets in Microsoft Excel
• Knowledge of material inventory management and nesting software
• Ability to effectively split time between office (75%) and production floor (25%)

Nice to Have Skills:

• Experience with AutoCAD CAM software
• Familiarity with additional software platforms or advanced nesting tools
• Strong problem-solving skills and meticulous attention to detail
• Ability to work efficiently in a fast-paced environment

Preferred Education and Experience:

• Technical training or certifications related to programming or manufacturing technology
• 1-2+ years of relevant experience in a manufacturing setting

Other Requirements:

• Effective time management skills to balance multiple priorities
• High school diploma or GED (Associate degree preferred)
• Willingness to adapt and grow in a role with expanding responsibilities and career pathways
• Ability to work on-site in Pittsburgh, PA

Embark on a rewarding career journey where your technical talents are valued and your potential is unlocked. Ready to make an impact? Apply now and take the next step toward a fulfilling future in manufacturing!