Mechanical Designer

Position: CADD Technician / CADD Programmer 
Pay Rate: $26.75+ (Pay based on prior experience) 
Shift: Monday - Friday (9:00am - 5:00pm)
Location: Pittsburgh, PA

Join a dynamic team as a CADD Technician / CADD Programmer and play a critical role in transforming innovative designs into precise, high-quality fabricated parts. Located in Pittsburgh, PA, this position offers the chance to work with state-of-the-art equipment within a forward-thinking manufacturing environment. As a key contributor, you'll leverage your technical expertise to ensure seamless production processes and support long-term growth within the organization.

Required Skills:

• 1-3 years of drafting or programming experience in AUTOCAD (Your coursework from a technical school counts!)
• Proficiency with AUTOCAD 2D, including interpreting manufacturer drawings
• Hands-on experience with SAP and handling print files such as .DXF and .DWG
• Strong aptitude for building spreadsheets in Microsoft Excel
• Knowledge of material inventory management and nesting software
• Ability to effectively split time between office (75%) and production floor (25%)

Nice to Have Skills:

• Experience with AutoCAD CAM software
• Familiarity with additional software platforms or advanced nesting tools
• Strong problem-solving skills and meticulous attention to detail
• Ability to work efficiently in a fast-paced environment

Preferred Education and Experience:

• Technical training or certifications related to programming or manufacturing technology
• 1-2+ years of relevant experience in a manufacturing setting

Other Requirements:

• Effective time management skills to balance multiple priorities
• High school diploma or GED (Associate degree preferred)
• Willingness to adapt and grow in a role with expanding responsibilities and career pathways
• Ability to work on-site in Pittsburgh, PA

Embark on a rewarding career journey where your technical talents are valued and your potential is unlocked. Ready to make an impact? Apply now and take the next step toward a fulfilling future in manufacturing!

Direct Hire Opportunity!-Full-time Employee from day 1!

Position: CNC Plasma Table Operator 
Pay Rate: $24/hr+ (Pay rate determined by prior experience) 
Schedule: M-F (Daylight) 
Location: Leetsdale, PA
Hire Type: Direct Hire-Full-time Employee from day 1!

Join a dynamic team as a CNC Plasma Table Operator and become a vital part of a leading manufacturer in the natural gas and industrial equipment industry. In this hands-on role, you will operate advanced CNC plasma and oxy-fuel burn tables to precisely cut heavy steel plates used in custom vessel fabrication, playing a key part in delivering high-quality products for critical infrastructure projects. If you enjoy working in a production-driven environment with an emphasis on safety, accuracy, and craftsmanship, this opportunity is perfect for you.

Required Skills:

• Experience operating CNC plasma, laser, or burn table equipment
• Ability to read blueprints and detailed work orders
• Proficiency with measuring tools such as tape measures and calipers
• Experience working with steel plates in a manufacturing or fabrication setting
• Strong attention to detail and focus on quality
• Physical ability to lift up to 50lbs and remain on your feet throughout shifts

Nice to Have Skills:

• Experience with nesting software or CNC programming
• Background in heavy fabrication, welding, or pressure vessel manufacturing
• Forklift or overhead crane operation experience

Preferred Education and Experience:

• Prior hands-on experience in CNC operation or metal fabrication
• Familiarity with blueprint reading and quality control procedures

Other Requirements:

• Ability to work safely in a manufacturing environment
• Willingness to perform routine machine adjustments and assist with maintenance as needed

Eager candidates who thrive in a collaborative, energetic environment and are committed to quality should seize this opportunity—apply now and take the next step in your skilled trades career!

Electrical Automation Technician - Maintenance Department - Direct Hire 

Shift: 2-2-3 Schedule (12-hour shifts)
Hours:  Night (6:00 PM – 6:00 AM)
Pay: $35–$40 per hour (based on experience)

A leading medical manufacturer is seeking an experienced Automation Technician to join their maintenance department. The main goal of this role is simple — keep the production lines running efficiently and minimize downtime.

This is a hands-on, technical position that involves troubleshooting, diagnosing, and repairing automated production systems in a fast-paced manufacturing environment. Candidates should have experience working with both mechanical and electrical systems in a heavily automated production facility. 

Key Responsibilities:

• Diagnose, troubleshoot, and repair automated production equipment, including molding machines, high-speed assembly systems, conveyors, robotic arms/ grabbers, sonic welders, and more
• Use HMI screens and fault codes to identify root causes of issues and resolve them quickly
• Work closely with machine operators to gather feedback, identify problems, and implement solutions
• Perform preventative maintenance per established schedules and documentation requirements
• Collaborate with engineering and management teams to implement process improvements, corrective actions, and technical solutions
• Assist with installation and setup of new automated equipment
• Train and support production personnel on the proper operation of machinery and best practices for minimizing downtime
• Fabricate or modify fixtures and equipment to improve reliability and efficiency
• Maintain accurate logs and documentation in accordance with company policies and GMP standards
• Follow facility safety and escalation procedures and promote a safe working environment

Qualifications:

• Associate degree in Mechatronics, Industrial Electricity, Maintenance Electricity, or related field preferred
• 5 years of hands-on experience with automated production equipment, plastics industry is preferred but not required.
• Strong electrical and mechanical troubleshooting background
• Experience with hydraulics, pneumatics, and electronic controls
• Ability to interpret electrical schematics, blueprints, and technical manuals
• Strong communication skills — able to interact with operators, engineers, and management effectively
• Self-starter with the ability to work independently with minimal supervision
• Must be comfortable working on a 2-2-3 schedule (12-hour shifts)

Training & Support:
New hires receive comprehensive training, including time shadowing senior technicians to learn the equipment, common faults, and standard repair procedures. Technicians work closely with experienced team members, managers, and engineers until they are fully confident working independently.

Benefits:

• Competitive pay ($34–$40/hr based on experience)
• Health, dental, and vision insurance
• Paid time off (3 weeks vacation)
• Flexible schedule
• Tuition reimbursement
• Parental leave program
• 401(k) with company match
• Employee stock purchase program

Apply Today:
This is an excellent opportunity to join a growing automation team in a cutting-edge medical manufacturing environment. Submit your resume today for immediate consideration!

Position: Mechanical Assembler-Breathing Apparatus Division 
Pay: $16.00hr 
Shift: Monday - Friday (7:00am - 3:30pm)
Location: Export, PA

Join our team as a Mechanical Assembler and play a vital role in manufacturing life-saving breathing apparatus products. If you’re detail-oriented, hands-on, and eager to contribute to a high-quality production environment, this is your chance to make a meaningful impact while developing valuable skills in a supportive and dynamic setting.

What You’ll Do:

As a Mechanical Assembler, you will be responsible for assembling breathing apparatus units through various tasks including:

• Hose assembly, soldering, filling, testing, and final product closure.
• You’ll work at multiple stations, ensuring each component meets  quality standards.
• Your teamwork and attention to detail will be essential as you collaborate with others to produce reliable, top-quality products.
• Use a variety of hand tools and specialized machinery, and be prepared to cross-train across different assembly tasks to support the overall manufacturing process.

Required Skills:

• High School diploma or equivalent
• Ability to perform detailed hand assembly and fine manipulation
• Basic computer skills for reporting production data
• Ability to lift up to 35 lbs and stand for up to 8 hours
• Strong attention to detail and adherence to procedures

Nice to Have Skills:

• Manufacturing or assembly experience
• Familiarity with hand tools and specialized machinery such as soldering irons, torque wrenches, and can seamers

Preferred Education and Experience:

• High School diploma or equivalent
• Prior manufacturing or assembly experience is advantageous but not mandatory

Other Requirements:

• Capable of working in a team-oriented environment
• Flexibility to work in various assembly stations as needed
• Cross-training required to enhance versatility

If you’re ready to join a dedicated team, contribute to life-changing products, and grow your career in manufacturing, we encourage you to apply today!

Position: Powder Coat Painter
Afternoon shift: 1:00 PM – 11:30 PM
Schedule: Sunday – Wednesday
Pay: $19 - $21 per hour, based on experience
Location: Glenshaw, PA
 

Job Overview:
Are you ready to play a vital role in the manufacturing of high-quality architectural and site products used in iconic commercial and public projects worldwide? As a Powder Coat Painter, you'll play a crucial role in applying high-quality powder coatings to a variety of castings and stampings. You'll work in an environmentally controlled paint room, ensuring that each piece meets our company's and customer’s strict quality standards. If you enjoy working in a fast-paced environment and take pride in your craftsmanship, this position offers both stability and growth potential.

Key Responsibilities:

• Load and unload parts onto the conveyor line
• Mask and unmask parts according to process sheets
• Spray off debris from parts as they move through the line
• Inspect parts carefully for defects
• Load finished parts onto pallets for shipping
• Maintain a clean and safe working environment in line with company regulations

Qualifications:

• Strong attention to detail
• Ability to stand for 8 hours a day
• Capable of lifting 50+ pounds
• Comfortable working in a fast-paced environment
• Prior experience with powder coating processes a plus
• Good hand-eye coordination and dexterity

Physical & Work Environment:

• Standing for extended periods
• Repetitive motions involved in masking and spraying
• Environmentally controlled paint room
• Ability to safely lift heavy parts and equipment
• Wear appropriate PPE as required
• Maintain cleanliness and safety standards at all times

If you're looking to advance your career in coatings and enjoy working with a collaborative team, don’t hesitate—apply now and start your next great adventure as a Powder Coat Painter!

Direct Hire Opportunity! Full-time Employee from day 1!
Position: Water Jet Operator 
Pay Rate: $20.00 - $30.00 (pay determined from prior experience) 
Location: Canonsburg, PA
Shift: 

• Training on 1st Shift: Monday–Friday, 7:00 AM – 3:00 PM
• Permanent Schedule: Swing Shift (alternating 1st & 2nd)
• Steady 2nd Shift available upon request
• 2nd Shift Hours: Monday–Thursday, 3:00 PM – 1:00 AM
• +$1.00/hr Shift Differential for 2nd Shift
• Overtime opportunities available

Are you a detail-oriented professional with a passion for operating manufacturing equipment? We’re seeking a skilled Water Jet Operator to join a thriving facility in Washington County, PA.
This critical role offers an exciting opportunity to work with advanced waterjet cutting technology within a stable, growth-oriented company that values its employees and fosters a supportive team environment. Whether you're experienced in CNC, laser, plasma, or general manufacturing machinery, this position provides a pathway for long-term career development, competitive pay, and excellent benefits.

Required Skills:

• Ability to read and interpret blueprints and work instructions
• Experience or willingness to learn waterjet, CNC, plasma, or laser machine operation
• Basic computer proficiency
• Skilled in using measuring tools like calipers and micrometers
• Ability to lift up to 55 lbs safely
• Forklift or overhead crane experience is a plus, with training available

Nice to Have Skills:

• Prior experience with waterjet cutting or similar manufacturing machinery
• Experience supporting quality checks and inspection processes
• Familiarity with Lean manufacturing or continuous improvement practices

Preferred Education and Experience:

• High school diploma or equivalent preferred
• Previous experience in manufacturing, CNC, laser, or plasma operations highly desirable
• Hands-on experience with blueprints and measurement tools

Other Requirements:

• Willingness to undergo training on 1st shift (Monday–Friday, 7:00 AM – 3:00 PM)
• Flexibility to work on swing shifts or the steady 2nd shift upon request
• Ability to support production goals while maintaining high safety standards

Benefits: 

• 12 days of PTO from 1st day-moves to 15 days after 1st year
• 8 Company paid holidays 
• Medical: (Highmark BCBS): $25 per pay for employee only; $60 per pay full family
• Dental: (MetLife)-100% employer paid
• Vision: (VBA): $2.22 per pay employee only; $6.93 per pay full family 
• MANY OTHER BENEFITS!

Kickstart your career in manufacturing with a company that values stability, growth, and teamwork! Apply now to become part of a dynamic environment dedicated to quality, safety, and employee success.

Position: TIG Welder
Pay: $20-$23hr
Working Days: Sunday - Wednesday OR Wednesday - Saturday
Shift Time: Afternoon: (3:00 PM - 1:30 AM) - Only time available for both options
Location: Glenshaw, PA

Join a renowned designer and manufacturer at the forefront of architectural and site product innovation, serving high-profile commercial and public projects worldwide. As a TIG Welder, you will play a vital role in our Pittsburgh manufacturing team, applying your skills to produce high-quality aluminum and steel components with safety, accuracy, and efficiency. This position offers a dynamic work environment with opportunities for career growth, performance incentives, and a chance to contribute to projects that make a real impact.

Required Skills:

• Minimum of 1 year of experience or training in TIG welding
• Proficiency in reading and interpreting blueprints, drawings, and job orders
• Skilled in operating measuring devices such as calipers and tape measures
• Basic computer navigation and data entry skills
• Ability to stand for at least 8 hours and lift up to 50 pounds
• Strong focus on safety, quality, and timeliness

Nice to Have Skills:

• Experience with aluminum and steel welding in both standard and custom projects
• Knowledge of welding symbols and inspection techniques
• Ability to perform material preparation like grinding, drilling, and cutting

Preferred Education and Experience:

• High school diploma or equivalent
• Prior experience in a manufacturing or industrial welding setting

Other Requirements:

• Willingness to work flexible shifts, including nights and overtime if necessary
• Commitment to maintaining a safe work environment and adhering to safety protocols

If you’re passionate about precision welding and eager to grow your career within a creative, high-performance team, we want to hear from you. Take the next step—apply now and weld your future with us!

Position: Woodshop Machine Operator 
Shift: Monday-Friday 7am-3:30pm
Pay Rate: $19-$22hr based on experience 
Location: Glenshaw, PA

Are you passionate about woodworking and looking for a stable, daytime role with growth opportunities? As a Woodshop Machine Operator in our dynamic Pittsburgh manufacturing team, you'll play a crucial part in producing high-quality wood components for high-profile commercial and public projects worldwide. This is your chance to develop your skills in a reputable environment that rewards performance with career advancement incentives. Enjoy a consistent Monday through Friday schedule from 7 am to 3:30 pm, and become a key contributor to our innovative team.

What You'll Do:

• Operate a range of woodworking machinery including saws, planers, routers, sanders, and CNC equipment to produce precise wood components.
• Read and interpret blueprints, technical drawings, and work orders to ensure accurate manufacturing.
• Measure, cut, shape, and finish wood materials to exact specifications.
• Perform routine maintenance and cleaning on equipment to maintain peak performance.
• Inspect finished products for quality and make adjustments as needed.
• Maintain a clean, organized, and safe work environment in compliance with safety standards.
• Report equipment issues or safety concerns immediately to supervisors.
• Collaborate effectively with team members to meet production deadlines and quality expectations.
• Lift up to 50 pounds as required in daily operations.

Required Skills:

• Proficiency in operating woodworking machinery such as saws, planers, routers, and sanders
• Ability to read and interpret blueprints, technical drawings, and work orders.
• Strong attention to detail and precision in measuring and finishing wood components.
• Good understanding of safety procedures and regulations.
• Ability to work efficiently in a fast-paced environment.
• Excellent teamwork and communication skills.
• Physical capability to lift up to 50 pounds.

Nice to Have Skills:

• Previous experience working in a woodshop or manufacturing environment.
• Familiarity with company-specific machinery or technical software.
• Certification in woodworking or manufacturing safety training.

Preferred Education and Experience:

• High school diploma or equivalent preferred.
• Prior experience in woodworking or manufacturing roles highly desirable.

 

Maintenance Technician | Multiple Shifts Available | Up to $33+/hr

TOPS Staffing is hiring experienced Maintenance Technicians for a well-established manufacturing company. We are looking for hands-on maintenance professionals with strong troubleshooting abilities and experience working on industrial production equipment.

Candidates with either strong electrical or strong mechanical maintenance experience are encouraged to apply. Ideal candidates will have a combination of both skill sets.

Available Schedules first hire will have choice of schedule they prefer:
 Monday–Friday | 8:00 AM – 4:30 PM
            or
 2-2-3 Schedule | 9:00 AM – 9:00 PM (offers 8hrs of OT pay every other week)
 

Pay: Up to $33+/hour based on experience and skill level

Responsibilities
• Perform preventative maintenance on production equipment
• Troubleshoot and repair electrical and mechanical issues
• Work with 3-phase, 480V electrical systems
• Diagnose and repair hydraulic and pneumatic systems
• Read and interpret electrical and mechanical schematics
• Disassemble and reassemble production machinery
• Perform equipment installations and repairs
• Support production uptime through fast and effective troubleshooting

Qualifications
• 2+ years of maintenance experience in manufacturing or industrial environments
• Experience with electrical troubleshooting and industrial equipment repair
• Knowledge of hydraulics and pneumatics required
• PLC troubleshooting experience is a plus
• Welding experience is helpful but not required
• Ability to read prints and schematics
• Strong mechanical aptitude and troubleshooting skills

Education
• High school diploma or GED required
• Associate degree or technical training in maintenance is a plus

Physical Requirements
• Standing, bending, kneeling, and climbing throughout shift
• Ability to lift up to 45 lbs.

Immediate openings available — actively interviewing and hiring now. Apply today through TOPS Staffing!